Specifications Index
SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | WORKING WITH A/C SERVICE STATION (1 Of 2) / WORKING WITH A/C SERVICE STATION (2 Of 2) | ||
| Torque | OVERVIEW - A/C COMPRESSOR POWER UNIT | ||
| Axle Nut/Hub Nut | |||
| Front | WHEEL BEARING | ||
| Rear | WHEEL BEARING AND TRAILING ARM | ||
| Battery | BATTERY | ||
| Brakes | |||
| Bleeding Sequence | HYDRAULIC SYSTEM | ||
| Disc Brakes | FRONT BRAKES , or REAR BRAKES | ||
| Torque | Refer to the appropriate procedures HYDRAULIC SYSTEM , FRONT BRAKES , or REAR BRAKES | ||
| Charging | |||
| Generator | GENERATOR | ||
| Torque | GENERATOR | ||
| Drive Belts | |||
| Adjustment | |||
| 2.0L | RIBBED BELT, REMOVING AND INSTALLING | ||
| Belt Routing | |||
| 2.0L | OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE | ||
| Engine Cooling | |||
| General Service Specifications | Refer to the appropriate FLUID CAPACITY TABLES information. | ||
| Radiator Cap Pressure | |||
| 2.0L | The pressure release valve must open at 1.4 to 1.6 bar (20.30 to 23.20 psi). COOLING SYSTEM, CHECKING FOR LEAKS | ||
| Thermostat R & I | |||
| 2.0L | N/A | ||
| Water Pump R & I | |||
| 2.0L | Refer to the appropriate procedure COOLANT PUMP/COOLANT THERMOSTAT | ||
| Engine Mechanical | |||
| 2.0L | |||
| Compression | COMPRESSION, CHECKING | ||
| Oil Pressure | OIL PRESSURE, CHECKING | ||
| Overhaul | ENGINE ASSEMBLY (4-CYLINDER DIRECT INJECTION 2.0L 4V TFSI ENGINE (EA 888EVO4)) , CYLINDER HEAD, VALVETRAIN (4-CYLINDER DIRECT INJECTION 2.0L 4V TFSI ENGINE (EA 888EVO4)) or CRANKSHAFT, CYLINDER BLOCK (4-CYLINDER DIRECT INJECTION 2.0L 4V TFSI ENGINE (EA 888EVO4)) | ||
| Torque | ENGINE ASSEMBLY (4-CYLINDER DIRECT INJECTION 2.0L 4V TFSI ENGINE (EA 888EVO4)) , CYLINDER HEAD, VALVETRAIN (4-CYLINDER DIRECT INJECTION 2.0L 4V TFSI ENGINE (EA 888EVO4)) or CRANKSHAFT, CYLINDER BLOCK (4-CYLINDER DIRECT INJECTION 2.0L 4V TFSI ENGINE (EA 888EVO4)) | ||
| Fluid Specifications | Refer to the appropriate Maintenance service information. | ||
| Engine Oil Drain Plug | 30Nm | ||
| Flywheel/Flex Plate Torque | 60 Nm + 90° | ||
| Fuel System | |||
| Pressure Specification | |||
| 2.0L | TRANSFER FUEL PUMP -G6-, CHECKING | ||
| Fuel Pressure Test Procedure | |||
| 2.0L | TRANSFER FUEL PUMP -G6-, CHECKING | ||
| Ignition | |||
| Firing Order & Cylinder Identification | N/A | ||
| Ignition Wires (Resistance) | Coil-On-Plug | ||
| Ignition Wires (Routing) | Coil-On-Plug | ||
| Spark Plug | |||
| 2.0L Engine | N/A | ||
| Starting | |||
| Starter | STARTER | ||
| Torque | OVERVIEW - STARTER | ||
| Wheel Alignment | |||
| Adjustment Specifications | AXLE ALIGNMENT | ||
| Torque | N/A |
||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 120 Nm | ||