Track Bars
| Condition | Code | Procedure |
|---|---|---|
| Attaching (mating) hole distorted | A | Require repair or replacement of bracket or frame |
| Attaching hardware broken | A | Require repair or replacement of hardware |
| Attaching hardware missing | C | Require replacement of hardware |
| Attaching hardware not functioning | A | Require repair or replacement of hardware |
| Attaching hardware threads damaged | A | Require repair or replacement of hardware |
| Attaching hardware threads stripped (threads missing) | A | Require replacement of hardware |
| Bent, affecting performance | B | Require replacement |
| Corroded, affecting structural integrity | A | Require replacement |
| Grease boot cracked | 2 | Suggest replacement of boot |
|
NOTE:
If boot is not available separately, suggest replacement of tie rod end (reason code 2). Cracked grease boot will allow contaminants to enter joint and will accelerate wear .
|
||
| Grease boot missing | C | Require replacement of boot |
|
NOTE:
If boot is not available separately, suggest replacement of track bar (reason code 2). Lack of grease boot will allow contaminants to enter joint and will accelerate wear.
|
||
| Grease boot torn | A | Require replacement of boot |
|
NOTE:
If boot is not available separately, suggest replacement of track bar (reason code 2). Torn grease boot will allow contaminants to enter joint and will accelerate wear.
|
||
| Holes distorted | A | Require replacement |
| Looseness (perceptible horizontal movement) | 1 | Suggest replacement |
|
NOTE:
If manufacturer's procedures for inspection exist, use those procedures; otherwise, use an approved inspection method such as the dry park check. Do not use pliers or pry bar to check ball and socket movement. Use only moderate hand pressure.
|
||
| Looseness that is excessive | B | Require replacement |
|
NOTE:
Excessive looseness is defined as being significant enough to affect vehicle handling or structural integrity. If manufacturer's procedures 'for inspection exist, use those procedures; otherwise, use an approved inspection method such as the dry park check.
|
||
|
CAUTION:
Do not use pliers or pry bar to check ball and socket movement. Use only moderate hand pressure.
|
||
| Mating (attaching) hole distorted | A | Require repair or replacement of bracket or frame |
| Nut on stud loose | A | Require repair or replacement of nut |
|
NOTE:
Check for bent stud or damaged mating hole.
|
||
| Seized | A | Require replacement |
| Stud bent | B | Require replacement |
|
NOTE:
Check for damaged mating hole.
|
||
| Stud broken | A | Require replacement |
|
NOTE:
Check for damaged mating hole.
|
||
| Threads damaged | A | Require repair or replacement |
| Threads stripped (threads missing) | A | Require replacement |
|
NOTE:
Check for damaged mating hole.
|
||
| Wear exceeds manufacturer's specifications | B | Require replacement |