Condenser, Removing And Installing, RS Models: Removing

• For all the following work, close the open lines and connections with clean plugs from the Engine Bung Set :VAS6122  .

-- Switch off the ignition.

-- Remove the bumper cover bracket together with the impact member. Refer to OVERVIEW - LOCK CARRIER .

-- Disconnect the refrigerant lines from the condenser. Refer to REFRIGERANT LINES, DISCONNECTING AND CONNECTING AT CONDENSER .

-- Release the catches -arrow- and remove the air duct -1 and 3-.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1- for the High Pressure Sensor -G65-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2-.

-- Release the left and right catches -arrows-, disengage and remove the condenser on the radiator.