Stabilizer Bar

Fig 1: Exploded View Of Stabilizer Bar

Courtesy of AUDI OF AMERICA, LLC

Nut
- 30 Nm
- Always replace after removing
- Remove and tighten evenly alternating from side to side.
Clamp
Stabilizer Bar
- With rubber bushing
- The rubber bushing cannot be replaced separately
- Removing and installing. Refer to STABILIZER BAR, REMOVING AND INSTALLING .
Nut
- 40 Nm + 90°
- Always replace after removing
- Tighten in the curb weight position. Refer to WHEEL BEARING IN CURB WEIGHT POSITION, LIFTING VEHICLES WITH COIL SPRING .
Subframe
Bolt
- Always replace after removing
Coupling Rod
- Removing and installing. Refer to COUPLING ROD, REMOVING AND INSTALLING .
Shock Absorber Fork
- Removing and installing. Refer to SHOCK ABSORBER FORK, REMOVING AND INSTALLING .
Nut
- 40 Nm + 90°
- Always replace after removing
- Tighten in the curb weight position. Refer to WHEEL BEARING IN CURB WEIGHT POSITION, LIFTING VEHICLES WITH COIL SPRING .
Bolt
- Always replace after removing