Overview - Spring
Courtesy of AUDI OF AMERICA, LLC- Rear Lower Transverse Link
- Removing and installing. Refer to REAR LOWER TRANSVERSE LINK, REMOVING AND INSTALLING .WARNING:
If the coil spring breaks resulting in surface damage to the transverse link, then the transverse link must be replaced.
- Removing and installing. Refer to REAR LOWER TRANSVERSE LINK, REMOVING AND INSTALLING .
- Coil Spring
- Removing and installing. Refer to SPRING, REMOVING AND INSTALLING .
- Installation position. Refer to Fig 2.
- Upper Spring Support
- Installation position. Refer to Fig 2.
- Lower Spring Support
- Installation position. Refer to Fig 2.
Coil Spring and Spring Plate Installation Position
- The end of the spring -1- must be positioned to the stop on the spring plates -2- -arrow-.
- The positioning pins of the spring plate must engage at the top in the holes in the body -3- and at the bottom in the holes in the rear transverse link -4- as shown.
