Flat Spots, Correcting

A flat spot from standing cannot be balanced.

• Flat spots cannot be removed from tires with workshop equipment.
• Such flat spots can be "driven out" only by driving the car until the tires are warm.
• We do not recommend the following method during cold or winter weather.

Requirements/Conditions

-- Check the tire pressure and correct, if necessary.

-- If possible, drive the vehicle on an expressway.

-- If the traffic and road conditions permit, drive at a speed of 120 km/h to 150 km/h (74 to 93 mph) for a distance of 20 to 30 km.

-- Lift the vehicle immediately after the performing the road test.

-- Remove the wheels from the vehicle.

-- Balance the wheels on the stationary balancing machine.