Emergency Release From P, A4/A5
It is necessary to check the parking lock emergency release after performing any work on it or after removing and installing the transmission.
Releasing
There is a risk of an accident from the vehicle starting to roll.
- Pull the parking brake button to activate the electro-mechanical parking brake.
-- Remove the trim from the cupholder in the center console.
-- Remove the unlocking element -2- from the vehicle tool kit.
-- Insert the release tool as shown in the mount -1- for the emergency release.
- The release tool is transverse to the direction of travel.
-- Turn the release tool 90° in direction of -arrow A-, t the same time push downward in direction of -arrow B- until it engages.
- The parking lock is released.
When the parking lock is emergency released, the "N" mode is displayed in the instrument cluster.
Additionally, the following message is displayed in the instrument cluster: "Vehicle may roll! P not possible. Please activate parking brake".
Resetting the Release
To reduce the dissolving power and to make handling easier the following procedure is necessary:
-- Operate the foot brake, start the engine and perform the position change N > D > N.
-- Switch off the engine grasp the socket with two hands and pull upward.
-- Operate the foot brake start the engine and perform the position change N > D > N.
When the parking lock is set "P" must be displayed in the instrument cluster and in the Selector Lever Transmission Range Display -Y5-.