Overview - Bearing Bracket

Fig 1: Bearing Bracket Exploded View

Courtesy of AUDI OF AMERICA, LLC

Circlip
Shaft
- For reverse gear intermediate sprocket
Thrust Washer
- For reverse gear intermediate sprocket
Reverse Gear Intermediate Sprocket
Needle Bearing
- For reverse gear intermediate sprocket
Bolts
- Replace after removing
- 8 Nm +90°
Retaining Plate
- For input shaft ball bearing
Input Shaft Ball Bearing
- Bearing "C"
- Installation position. Refer to Assembling
- Removing. Refer to Figure.
- Inserting. Refer to Assembling .
Locking Sleeves
- Quantity: 4
- Locking sleeves, removing and installing. Refer to Figure.
Gearshift Rail/Shift Fork for 2nd Gear and Reverse Gear
Gearshift Rail/Shift Fork for 4th and 6th Gear
Mounting Bracket
- For Gearshift Rail/Shift Fork for 4th and 6th Gear and Gearshift Rail/Shift Fork for 5th and 7th Gear
Bolt
- 6 Nm +30°
Gearshift Rail/Shift Fork for 5th and 7th Gear
Gearshift Rail/Shift Fork for 1st and 3rd Gear
Circlip
- Installation position. Refer to Assembling - Locking ring installed position -1- : the flat side faces the ball bearing and the bevel -arrow- to the 1st gear assembly
Output Shaft Ball Bearing
- Bearing "G"
- Installation position. Refer to Assembling
- Removing. Refer to Figure.
- Inserting. Refer to Assembling .
Bearing Bracket
- Disassembling and Assembling. Refer to BEARING BRACKET, DISASSEMBLING AND ASSEMBLING .