Charge Air Pressure Control Module -GX34-, REMOVING AND INSTALLING: Removing

• Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

TIP: 

Courtesy of AUDI OF AMERICA, LLC

The following step is only required, if the bolts must be replaced.

-- Remove the bolts -arrows- and remove the heat shield -1-.

-- Slightly lift the locking spring -3- with a small screwdriver and remove from the ball pin control rod.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

-- Remove the bolts -arrows- and the Charge Air Pressure Control Module -GX34-.