Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING: Removing

Audi A4/A5:

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the screw-type clamp -2-, remove the air duct pipe from the Throttle Valve Control Module -GX3- and slightly push it to the left side.

Charge Air Pressure Sensor -G31- with Threaded Connection:

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-.

-- Remove the bolt -2- and disconnect the connector -1- and remove it from the air duct pipe.

Charge Air Pressure Sensor -G31- with Locking Tab:

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-.

-- Turn the Charge Air Pressure Sensor -G31- -2- clockwise and remove from the air duct pipe.