Particulate Filter Differential Pressure Sensor - G1037-, REMOVING AND INSTALLING: Installing

Install in the reverse order of removal while noting the following:

• To clear away any blockage or ice build-up due to condensation water, blow through the hose with compressed air in the direction of the emissions control module.
• Check the hoses for secure fit and leaks.
• If the control lines at the emissions control module were loosened, tighten them to their tightening specification.
• Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Electronic Parts Information (ETKA).

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .