Molded Foam Part, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

-- Engage the pedestrian protection crash sensor -1- into the molded foam part -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Insert the pressure hose -2- into the recess in the molded foam part.

• The pressure hose must be inserted without any tension.

-- If equipped, insert the reinforcement -1- in the molded foam part -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Attach the connector -1- to the crash sensor until it clicks into place in direction of -arrow-.

Fig 1: Identifying Connector

Courtesy of AUDI OF AMERICA, LLC

-- Push in the connector lock -2- to secure the connector.