Rear Lid Tail Lamp, Aligning With Body Contour: Procedure

-- Sedan: Release the cover -1- from the clamp in direction of -arrow- and fold to the side.

Courtesy of AUDI OF AMERICA, LLC

-- Avant: Pry off the cover -1- using the :3409  in the direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the nuts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

Adjustment in Direction of Travel

Courtesy of AUDI OF AMERICA, LLC

-- Screw the adjusting screws -1, 2 and 4- in and out in stages

• The tail lamp must be flush with the body contour.

Lengthwise Adjustment

-- Screw the adjusting screws -1, 2 and 4- in and out in stages.

• The tail lamp must be flush with the body contour.