Fuel Filler Door Unit, Removing And Installing: Removing
-- Open the cover of the luggage compartment side trim panel and free up the emergency release cable.
-- Loosen the rear section of the right wheel housing liner and push it to the side. Refer to REAR WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Free up the drain hose -1- -arrows-.
-- Remove the fuel filler door trim. Refer to FUEL FILLER DOOR TRIM, REMOVING AND INSTALLING .
-- Release the fuel filler door unit by using a small screwdriver to pierce the markings -arrows-.
-- At the top of the fuel filler door unit, pierce a small screwdriver through the markings -arrows- at an angle from below into the fuel filler door through the retainers.
-- Gently lift the screwdriver upward and release the retainers.
-- On the underside, pierce the screwdriver at the markings at an angle from above to below.
-- Gently push the screwdriver downward and release the retainers.
-- Remove the fuel filler door unit with the drain hose gradually from the opening.
-- Disconnect the connector.
-- Remove the fuel filler door unit while guiding out the emergency release cable.


