Radiator Grille, Removing And Installing, A4 ALLROAD Before Product Improvement: Removing
-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -3- and free up the wiring harness -1-.
-- Remove the bolts -2 and 5-.
TIP:
The center bolt of the bolts -2- is not installed.
-- Release the tabs and retainers in direction of -arrows-.
-- Remove the radiator grille -4- from the bumper cover.
-- The following components must also be removed if the lock carrier is being replaced:
- Remove the backing panel. Refer to BACKING PLATE, REMOVING AND INSTALLING .