Remove the Coil Spring

• Suspension strut is removed. Refer to SUSPENSION STRUT, REMOVING AND INSTALLING .

-- Tension the :VAG1752/1  -1- in a vise with jaw protectors.

1. :VAG1752/1 
2. :VAG1752/6 

-- Arrange the special tools as shown:

1. :VAG1752/1 
2. Ratchet (commercially available)
3. :T10001/7 
4. :T10001/11 
5. :T10001/3 
6. :VAG1752/6 

-- Pretension the coil spring in the spring tensioner, until the upper spring plate and the spring support are disengaged.

-- Pull off the cover.

-- Remove the nut from the piston rod.

-- Remove the individual components of the suspension strut and coil spring using the spring tensioner.

Shock Absorber, Replacing 

-- Remove the cap -4- and the lower spring support -2-.

-- Loosen the spring plate -1- using a plastic mallet and remove upward from the shock absorber -3-.