Adjustment Dimension, A5 Coupe
Door Window to the A-Pillar
- Gap dimension -b- = 5.5 mm
- Gap dimension -c- = 4.9 mm
- Dimension -a- = 100 mm, measured from the A-pillar trim
-1- Door window
-2- Roof trim molding
Door Window to Back of Roof
- Gap dimension -d- = 5.7 mm
- Gap dimension -e- = 3.3 mm
- Dimension -f- = 100 mm measured from the center of the inner door seal
-1- Door window
-2- Roof trim molding
Door Window to Side Window
- Gap dimension -g- = 8 to 10 mm
- Flush dimension -h- = ± 0.7 mm
- Parallel alignment = 0.9 mm.
-1- Door window
-3- Side window
