Mount With Convertible Top Locking Motor -V223-, Removing And Installing: Removing

-- Remove the front trim panel. Refer to FRONT TRIM PANEL, REMOVING AND INSTALLING .

-- Using a small screwdriver, lift the locking spring -1- slightly and remove the ball socket -2- from the ball pin.

Courtesy of AUDI OF AMERICA, LLC

-- Free up the wiring harness -6-.

-- Remove the screws -arrows-.

-- Remove the mount -5- with the Convertible Top Locking Motor -V223-.

-- Carefully push the retainer -4- on both sides to disconnect the connector -3-.