Hydraulic System Fluid Level, Checking
Procedure
-- Lift the luggage compartment floor.
-- Remove the storage compartment for the wind deflector.
-- Remove the lock carrier trim panel. Refer to LOCK CARRIER TRIM PANEL, REMOVING AND INSTALLING .
- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Remove the tool box -4-.
-- Place the hydraulic pump -3- with the attached lines toward the rear.
-- Remove the adhesive strip -2-.
-- Remove the noise insulation -1-.
-- Open and close the convertible top twice using the electro-hydraulic actuator.
-- Check the oil level in the reservoir -1- with the convertible top opened and the convertible top compartment cover closed.
- The oil level must be within the "+" - marking -arrow-. At the same time the hydraulic pump must be horizontal.
-- If necessary fill the hydraulic system. Refer to HYDRAULIC SYSTEM, FILLING AND BLEEDING .


