Convertible Top Control Module -J256-, Removing And Installing: Removing

-- Remove the Relay and Fuse Panel 2 -SR2-. Refer to VEHICLE ELECTRICAL SYSTEM, GENERAL REPAIR INFORMATION .

-- Release the retainer -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bracket -2- for the control modules upward in direction of -arrow- and move to the side.

-- Release the catches in direction of -arrows- and remove the Convertible Top Control Module -J256- -2- slightly.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connectors -3, 4 and 5-.

-- Remove the Convertible Top Control Module -J256- from the mount -1-.