Drive Axle, Disassembling And Assembling, Inner CV Joint: Notes

Special tools and workshop equipment required

CAUTION:

This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.

Mandatory Replacement Parts

Inner CV Joint, Removing

Fig 1: Driving Cover Down With Copper Or Brass Drift

Courtesy of AUDI OF AMERICA, LLC

-- Clamp the drive axle horizontally in a vise with protective covers.

-- Drive down the cover with a copper or brass mandrel in direction of -arrow-.

-- Drive down the cap with a copper or brass mandrel in direction of -arrow-.

Fig 2: Secure Drive Axle With Protective Covers In A Vise Clamp

Courtesy of AUDI OF AMERICA, LLC

-- Only open and remove the "small" CV boot clamp.

-- Remove the circlip using the locking ring pliers.

Fig 3: Opening Clamps And Pulling Off CV Joint Boot From Inner Joint

Courtesy of AUDI OF AMERICA, LLC

-- Arrange the special tools as shown.

Fig 4: Pressing CV Joint Off Of Drive Axle

Courtesy of AUDI OF AMERICA, LLC

-- Press the inner CV joint off of the drive axle.

-- Remove the CV boot from the drive axle.