Brake Fluid Reservoir, Removing And Installing: Installing
- Coat the plugs on the brake fluid reservoir with brake fluid.
-- Insert the brake fluid reservoir into the plugs in the brake master cylinder.
Further installation is performed in reverse order of removal, while noting the following:
-- Fill the brake fluid reservoir up to the "MIN" mark.
-- Remove all cloths from the vehicle that were previously placed down.
-- Bleed the brake system. Refer to HYDRAULIC SYSTEM, BLEEDING .
-- Install the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .
CAUTION:
Faulty brakes increase the risk of an accident.
- Make sure the brakes are working correctly before driving the vehicle for the first time.
-- Check brake fluid level, and fill if necessary.