Vacuum Sensor -G608-, Removing And Installing: Installing

-- Insert the Vacuum Sensor -G608- in the retainer.

NOTE:

The Vacuum Sensor -G608- must be felt engaging in the retainer.

NOTE:

Make sure the vacuum hose is connected at all of the separating points.

-- Slide the connector on the Vacuum Sensor -G608-

-- Lock the connector for the Vacuum Sensor -G608-. Push the slider on the connector toward the front to do this.

NOTE:

The connector must be securely locked to the connection with the slider to prevent the connector from sliding out.

-- Install the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .