Piston Spray Nozzles Oil Pressure, Checking
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Oil Pressure Gauge Kit :VAG1342
- Vehicle Diagnostic Tester - Test Adapter - 2+3 Pin :VAS5571
Test Requirements
- Oil level OK
- The engine oil temperature at least 80 °C (176 °F) (the radiator fan must start up once).
Test Sequence
-- Remove the Oil Pressure Switch, Level 3 -F447-. Refer to Oil Pressure Switch, Level 3 -F447-, REMOVING AND INSTALLING .
-- Install the oil pressure switch in the :VAG1342 .
-- Install the :VAG1342 in place of the oil pressure switch.
-- Connect the :VAS5571 to the oil pressure switch.
-- Insert the connector for the Oil Pressure Switch, Level 3 -F447- on the :VAS5571 .
-- Let the engine and run as long as the test requires.
-- Check the oil pressure using the Vehicle Diagnostic Tester Oil Pressure Switch, Level 3 - F447 .
Assembling
-- Install the Oil Pressure Switch, Level 3 -F447-. Refer to Oil Pressure Switch, Level 3 -F447-, REMOVING AND INSTALLING .