Radiator Shutter Motor -V544-, REMOVING AND INSTALLING, AUDI A4/A5: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the lock carrier cover. Refer to OVERVIEW - BUMPER COVER .
-- Remove the bolts -arrows- and air duct -1-.
-- Remove the connector -1- for Radiator Shutter Motor -V544- from the bracket and disconnect.
-- Remove the bolts -arrows- to do so push the connecting panel -3- carefully upward or downward.
-- Remove the adjustment motor with the bracket -2- and slats.
-- Disconnect the connector -4- on the Radiator Shutter Motor -V544- -3-.
-- Remove the bolts -2-.
-- Carefully unclip the carrier -1- in direction of -arrow A- and at the same time remove with the adjustment motor from the bracket -5- in direction of -arrow B-.
-- Remove the adjustment motor from the carrier.


