Vibration Damper Seal, Replacing: Removing

Fig 1: Identifying Seal Installer - Crankshaft T40274

Courtesy of AUDI OF AMERICA, LLC

-- Remove the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .

-- Remove the seal -arrow- with the : T40274  .

-- Clean the contact and sealing surface.

-- Push the seal -arrow- on the : T10354  .

Fig 2: Identifying Crankshaft Seal Installer T10354

Courtesy of AUDI OF AMERICA, LLC

• The closed side of the seal points to the : T10354  .

-- push the seal -arrow- with the : T10354  on the : T10531/6  -1- and place on the lower timing chain cover.

Courtesy of AUDI OF AMERICA, LLC

-- Also screw in the : T10375  and tighten the : T10531/4  .

Fig 3: Driving Seal In Using Seal Installer - Crankshaft T10354

Courtesy of AUDI OF AMERICA, LLC

-- Drive the seal in all the way using the : T10354  .