High Pressure Pipe, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Remove the nuts -arrows- and the bolt -2-.

Fig 1: Heat Shield For Vehicles With Particulate Filter

Courtesy of AUDI OF AMERICA, LLC

-- Free up the wires and remove the heat shield -1- (example illustration).

-- Remove the screw -2- and move the bracket to the side.

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

The fuel system is under pressure.

Risk of injury from fuel spraying out.

- Wear protective eyewear.

- Wear safety gloves.

- Reduce the pressure: place clean cloths around the connection point and carefully open the connection point.

-- Place a cloth underneath to catch leaking fuel.

-- Remove the union nuts -1 and 2- and then remove the high pressure pipe.

Courtesy of AUDI OF AMERICA, LLC