Vibration Damper, Removing And Installing, Version 2: Notes

Vibration damper, version 2. Refer to Figure.

Special tools and workshop equipment required 

• Wrench - 21mm: T40263 
• Adapter: T40314 
• Counterhold: T40379 
• Vibration Damper Assembly Tool: T10531 
• Vibration Damper Assembly: T10531/5-/6 

• The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt, the chain sprocket must be secured to the crankshaft as described in the following.
  Fig 1: Locating Vibration Damper Bolt

  Courtesy of AUDI OF AMERICA, LLC

Tool Preparation

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the adapter -1- from the : T10531/1  .