LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2021 >> A4 Quattro Premium Plus, 2.0L Eng VIN B >> Repair and Diagnosis (Single Page) >> External Pages >> Different variant/trim >> Section 4 (Engine Assembly (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4))) >> 10 Engine Assembly >> Assembly Mounts >> Overview - Assembly Mounts >> Overview - Dual Clutch Transmission Mount, Version 1

Overview - Dual Clutch Transmission Mount, Version 1

WARNING: This page is about a different variant/trim than selected.
Fig 1: Exploded View Of Subframe Mount With Components
GWWA10-11614Courtesy of AUDI OF AMERICA, LLC
  1. Bolt
    • Tightening specifications. Refer to the appropriate Service Information .
  2. Tunnel Crossmember
    • Removing and installing. Refer to the appropriate Service Information .
  3. Stop
    • For the transmission mount
  4. Transmission Mount
  5. Transmission
  6. Nut
    • Tightening specifications. Refer to the appropriate Service Information .
    • Only remove when the transmission mount must be separated from the transmission support
  7. Transmission Support
  8. Bolt
    • Tightening specifications. Refer to the appropriate Service Information .
  9. Bolt
    • Tightening specifications. Refer to the appropriate Service Information .
    • Only remove when the transmission mount must be separated from the transmission support
  10. Nut
    • Tightening specifications. Refer to the appropriate Service Information .
    • Only remove when the transmission mount must be separated from the transmission support
scientia non olet · About LEMON Manuals