Engine, Supporting In Installation Position, AUDI A4/A5

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

Procedure

CAUTION:

Risk of injury due to the engine weight shifting.

The possibility for parts of the body to be pinched or crushed increases.

- Only support the engine when the transmission and tunnel crossmember are removed.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Remove the left and right cover for the fender. Refer to OVERVIEW - FENDER .

-- Position the : 10-222B as shown.

Courtesy of AUDI OF AMERICA, LLC

-- Engage the : 10-222B/11 on the engine lifting eye.

-- Pretension the engine with the spindle, do not lift.

Assembling

Assemble in the reverse order of removal. Note the following:

-- Remove the : 10-222B from the engine.

-- Remove the fender covers. Refer to OVERVIEW - FENDER .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .