Engine, Supporting In Installation Position, AUDI A6/A7

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

Procedure

CAUTION:

Risk of injury due to the engine weight shifting.

The possibility for parts of the body to be pinched or crushed increases.

- Only support the engine when the transmission and tunnel crossmember are removed.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Remove the left and right covers for the fender. Refer to OVERVIEW - FENDER .

Audi A6:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and push the E-box slightly to the side.

Continuation for All:

Courtesy of AUDI OF AMERICA, LLC

-- Position the : 10-222A as shown.

-- Engage the : 10-222B/11 on the engine lifting eye.

-- Pretension the engine with the spindle, do not lift.

Assembling

Assemble in the reverse order of removal. Note the following:

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .