LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2021 >> A4 Quattro Premium Plus, 2.0L Eng VIN B >> Repair and Diagnosis (Single Page) >> External Pages >> Different variant/trim >> Section 2 (Exhaust System, Emission Controls (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4))) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Front Muffler, Removing And Installing >> Front Muffler, Removing And Installing, Vehicle With Particulate Filter >> Removing

Front Muffler, Removing And Installing, Vehicle With Particulate Filter: Removing

WARNING: This page is about a different variant/trim than selected.

Audi A6/A7

-- Remove the front tunnel brace. Refer to OVERVIEW - UNDERBODY BRACING .

Audi Q5:

-- Remove the rear noise insulation. Refer to OVERVIEW - NOISE INSULATION .

Continuation for All Vehicles:

Fig 1: Identifying Left Front Muffler Nuts
GWWA26-11055Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows- from the front muffler.

-- Remove the front muffler bolts -arrows-. (Shown on the right.)

Fig 2: Identifying Bolts
GWWA26-11144Courtesy of AUDI OF AMERICA, LLC
GWWA26-11726Courtesy of AUDI OF AMERICA, LLC

-- Loosen the clamping sleeve -arrows- and push toward the rear.

CAUTION:

Risk of damaging the coupling due to improper handling.

- Coupling must not be bent more than 10°.

- Do not load the coupling on the cable.

-- Remove the front muffler.