Maintenance Service Reminder Reset - Procedure 02

1. Switch ignition off.
2. Press odometer and instrument cluster reset buttons while switching ignition on. See Fig 1. Trip recorder display (3) will read "service OIL".
3. Release buttons.
NOTE: Depending on make of instrument cluster, display on trip recorder will either continue to read "service OIL' (Nippon Seiki) or change to "- - -" (VDO).
4. Pull clock adjuster button (1) on instrument cluster and hold for approximately 2 seconds. This resets "service OIL" display.
5. Press trip recorder reset button again to advance to next type of service.
6. Release button. Trip recorder display will read "service INSP".
NOTE: Depending on the make of the instrument cluster, the display on the trip recorder will either continue to read "service INSP" (Nippon Seiki) or change to " - - -" (VDO).
7. Pull clock adjuster button on instrument cluster and hold for approximately 2 seconds. This resets "service INSP" display.
8. Switch ignition off.

Fig 1: Identifying SRI Reset Buttons (1998-2001 A4)

Courtesy of AUDI OF AMERICA, INC.