UNCLIP The Remaining Clips Along The Door Trim Panel From The Door. The Markings Indicate The Position Of The Clips.

-- Pull the door trim panel -1- slightly off the door all the way around.

• The clips must not be left inside the door.

-- Press the door trim panel upward out of the clip -3- and disengage from the door on the window shaft -arrows- .

-- Unclip the release cable -3- carefully from the interior door mechanism -2- .

Fig 1: Swivel Interior Door Mechanism Cable Toward Inside

-- Tilt the interior door mechanism cable toward the inside in direction of -arrow- .

-- Disengage the ends of the cable -1- from the interior door mechanism.

-- Disconnect the connectors -1 and 2- from the door control module by pressing the release.

-- Equipped on some models: disconnect the connector for the midrange speaker.

-- Remove the door trim panel.