Power Supply

When retrofitting radio systems in the vehicle, the Battery -A- is used to connect the positive and negative wires.

The wiring harness must also be made:

• Positive wire: 2.5 mm strong red wire
• Negative wire: 2.5 mm strong brown wire
• Terminal 15 wire: 1.5 mm strong black wire

The positive wire should be equipped with a fuse next to Battery -A-. Attach a fuse panel next to the Battery -A- for this. Cover the positive and negative wires with an insulating hose. Attach the appropriate cable shoes on the battery side. Proceed according to the radio system operating instructions on the device side. Refer to Operating Instructions.

Route the additional wiring harness separately from the vehicle wiring (distance greater than 10 cm).