43 DTC B200-Ff Is Stored In The J775 (GROUP 43, NO. 24-97)
Reference number: GROUP 43, NO. 24-97
Supersedes refnos: 2051336, 2051336/1, 2051336/2, 2051336/3, 2051336/4, 2051336/5, 2051336/6, 2051336/7, 2051336/8, GROUP 43, NO. 20-32, GROUP 43, NO. 21-46, GROUP 43, NO. 21-47, GROUP 43, NO. 21-56, GROUP 43, NO. 22-63, GROUP 43, NO. 23-73
43 DTC B200-FF IS STORED IN THE J775
TECHNICAL SERVICE BULLETIN
| AUDI: | 2017-2025 A4, and A5 allroad; 2018-2025 S4, A5, A5 Cabriolet, A5 Sportback, S5, S5 Cabriolet, and S5 Sportback; 2018-2019, 2021-2025 RS 5; 2019, 2021-2025 RS 5 Sportback |
| GROUP: | 43 - Self-Leveling Suspension |
SERVICE INFORMATION
43 24 97 2051336/8 September 9, 2024. Supersedes Technical Service Bulletin Group 43 number 23-73 dated May 19, 2023, for reasons listed below.
| Model(s) | Year | VIN Range | Vehicle-Specific Equipment |
|---|---|---|---|
| A4, and A5 allroad | 2017 - 2025 | All | Suspension with Electronic Damper Control |
| S4, A5, A5 Cabriolet, A5 Sportback, S5, S5 Cabriolet, and S5 Sportback | 2018 - 2025 | ||
| RS 5 | 2018 - 2019 2021 - 2025 |
||
| RS 5 Sportback | 2019 2021 - 2025 |
CONDITION
| Revision | Date | Purpose |
|---|---|---|
| 8 | - | Revised header (Added model year) Revised Service (Updated Information) Revised Warranty (Updated Information) |
| 7 | 05/19/2023 | Revised header (Added model year) |
| 6 | 06/07/2022 | Revised header (Added model year) |
Customer states:
- A fault in the damping control is indicated in the instrument cluster.
Workshop findings:
- The DTC B200FF0 (internal malfunction) is stored in the J775 (address word 0074).
TECHNICAL BACKGROUND 1
The conditions for the DTC apply.
PRODUCTION SOLUTION
Not applicable.
SERVICE
The DTC does not affect the handling characteristics of the vehicle.
Perform steps in the GFF, if no discrepancies occur, perform basic settings of the J775 and delete the DTC (Use Guided Function 0074 - Basic Settings Complete for the basic settings).
It is not necessary to replace the control unit.
WARRANTY
| Claim Type: |
|
||
| Service Number: | 4316 | ||
| Damage Code: | 0040 | ||
| Labor Operations: | GFF | 0150 0000 | Time stated on the diagnostic protocol |
| Charge Battery | 2706 | 8950 See SRT with associated operations | |
| Control Unit Setting Performed | 4316 1550 | See SRT with associated operations |
|
| Road test prior to service procedure | No allowance | 0 TU | |
| Road test after service procedure | No allowance | 0 TU | |
| Claim Comment: | As per TSB 2051336/8 | ||
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual . Claims are subject to review or audit by Audi Warranty.
ADDITIONAL INFORMATION
All parts and service references provided in this TSB (2051336 ) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2024 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher.