Overview - Sill Panel

Fig 1: Overview Sill Panel

Rear Sill Panel
- Removing and installing. Refer to REAR SILL PANEL, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Stretch the door seal lip over
Clip
- Replace damaged or deformed clips
- Insert in the sill panel
- Remove any remaining clips in the body mounting points using the Omega Clip Tool:T40280 . To install, insert into the sill panel strip.
- Quantity: 2
A-Pillar Gap Cover
- Removing and installing. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
- Clip into the A-pillar upper trim panel and the sill panel
- Stretch the door seal lip over
Bolt
- 2.5 Nm
- Only driver side
Front Sill Panel
- Removing and installing. Refer to FRONT SILL PANEL, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Stretch the door seal lip over
Clip
- Replace damaged or deformed clips
- Insert in the sill panel
- Remove any remaining clips in the body mounting points using the Omega Clip Tool:T40280 . To install, insert into the sill panel.
- Quantity: 4
Clip
- Replace damaged or deformed clips
- Insert in the sill panel
- Remove any remaining clips in the body mounting points using the Omega Clip Tool:T40280 . To install, insert into the sill panel.
Clip
- Insert in the sill panel