B-Pillar Upper Trim Panel, Removing And Installing: Installing

WARNING:

Risk of injury due to involuntary deployment.

Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
Do not pinch the head curtain airbag when installing the B-pillar trim panel.

-- Guide the seat belt webbing with the belt tongue in through the belt height adjuster slider.

NOTE:

Make sure that the belt height adjuster is in the lowest position.

-- First, insert the B-pillar trim panel upward into the mount on the roof.

The retaining pin -1- for the sliding piece on the B-pillar trim panel must engage in the mount -2- on the seat belt height adjuster -arrow- .

Further installation is the reverse order of removal.