Input Shaft 1, Disassembling And Assembling: Notes

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

• Drive Sleeve :30-20 
• Press Piece - Trailing Arm :2010 
• Press Piece - Front Control Arm :2040 
• Press Plate :VW401 
• Press Plate :VW402 
• Press Piece - Multiple Use :VW412 

Special tools and workshop equipment required 

• Thrust Piece :T10431/1 
  Fig 1: Identifying Assembly Tool T10431

  Courtesy of AUDI OF AMERICA, LLC
• Wishbone Rubber Mount Assembly Tool :T10219/1 

  Courtesy of AUDI OF AMERICA, LLC

• Press Tool :T40323 
• Extracting Tool - Press In Piece :T40413/11 

  Courtesy of AUDI OF AMERICA, LLC

• Input shaft 1, removed. Refer to INPUT SHAFT 1, REMOVING AND INSTALLING INDIVIDUALLY .

Disassembling

If necessary, remove the sensor wheel:

Press off the sensor wheel 1

-- Insert the input shaft -1- with the sensor wheel -2- in the corresponding groove of the Press Plate :VW402  -3-.

-- Press off the input shaft -1- downward.

Input shaft 1, pressing out

• If not removed, make sure that the sensor wheel -1- is not damaged.