Overview - Luggage Compartment Side Trim Panel, Sedan

Fig 1: Luggage Compartment Side Trim Panel, Sedan

1. Clip
   • Replace damaged or deformed clips
   • Insert in the trim panel
   • Remove any clips remaining in the mounting points using the Omega Clip Tool:T40280  and insert them into the trim panel for installation.
   • Quantity: 4
2. Tie Down Bracket
   • Removing and installing. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, SEDAN .
3. Trailer Hitch Button Trim
   • Equipped on some models
   • Removing and installing. Refer to .
4. Clip
   • Replace damaged or deformed clips
   • Insert in the trim panel
   • Remove any clips remaining in the mounting points using the Omega Clip Tool:T40280  and insert them into the trim panel for installation.
   • Quantity: 2
5. Lid Hinge Frame
   • Removing and installing. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, SEDAN .
   • Engage in the trim panel and press on it until it engages audibly
6. Bolt
   • 1.8 Nm
   • Quantity: 2
7. Expanding Nut
   • Quantity: 2
   • Clipped in the rear shelf
8. Bag Hooks
   • Removing and installing. Refer to BAG HOOK, REMOVING AND INSTALLING .
9. Expanding Clip
   • Remove using the Pliers:T40172C 
   • Quantity: 2
10. Luggage Compartment Side Trim Panel
    • Removing and installing. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, SEDAN .
    • Press on until it engages audibly
    • Stretch the lip of the rear lid seal over
11. Bolt
    • 9 Nm
    • Quantity: 2
12. Tie Down
    • Quantity: 2
    • Removing and installing. Refer to TIE DOWN, REMOVING AND INSTALLING .
13. Lock Carrier Trim Panel
    • Removing and installing. Refer to LOCK CARRIER TRIM PANEL, REMOVING AND INSTALLING .
    • Must engage in the pins
    • Press on until it engages audibly
    • Stretch the lip of the rear lid seal over