Overview - Steering Gear
- Bolt
- Tightening specification -Item 2- Subframe .
- Always replace after removing
- Subframe Crossbrace
- Overview. Refer to OVERVIEW - SUBFRAME .
- Steering Gear with Tie Rods
- With the following integrated components
- Electromechanical Power Steering Motor -V187-
- Power Steering Control Module -J500-
- Always replace the steering gear if faulty
- The components cannot be replaced separately.
- Removing and Installing. Refer to STEERING GEAR, REMOVING AND INSTALLING .
- Servicing. Refer to OVERVIEW - STEERING GEAR, TIE RODS .
- With the following integrated components
- Subframe
- Overview. Refer to OVERVIEW - SUBFRAME .
- Steering Intermediate Shaft
- Removing and installing. Refer to STEERING INTERMEDIATE SHAFT, REMOVING AND INSTALLING .
- Wheel Bearing Housing
- Overview. Refer to OVERVIEW - WHEEL BEARING .
- Bolt
- Tightening specification -Item 1- OVERVIEW - STEERING COLUMN.
- Nut
- 140 Nm
- Always replace after removing
- Remove the adhesive residue from the pin threads after removing