Tires, Changing, Vehicles With Tire Pressure Monitoring System
Dismounting
The metal valve and the tire pressure sensor can be used again.
-- Release the tire air by unscrewing the nickel-plated valve insert.
-- Roll or press the tire off.
-- When using pressure paddles, first separate tires from side opposite of valve.
Do not use a bead breaker in the shaded area -a-.
-- Position the mounting head near the valves so the tire iron can be positioned approximately 30° -b- next to the valve.
-- Then remove tire in valve area first.
-- Visually inspect for any loosened or damaged parts.
If there are any loosened threaded connections, replace the entire valve unit.
Replace a damaged tire pressure monitoring sensor.
Installing
Do not use a bead breaker in the valve area.
-- Position the tire pressure monitoring sensor approximately 180° opposite the mounting head.
-- Press the tire into the bed approximately 90° in front of mounting head -arrow-.
-- Mount the tire.
-- Install a new valve insert.
-- Fill the tires and install the plastic cap.
-- Balance the tires.