Metal Valve Body, Removing And Installing

Special tools and workshop equipment required 

• Torque Wrench :VAG1410 

-- Place the metal valve with rubber seal through rim from inside.

-- Position the beveled washer and union nut from outside and tighten.

-- Secure against turning with counterholder -1- (for example, a 2 mm drill bit).

Fig 1: Securing Against Turning With Counter Hold

Courtesy of AUDI OF AMERICA, LLC

-- Push the tire pressure monitoring sensor -1- into the bed and tighten.

Fig 2: Pressing Wheel Electronics Into Bed

Courtesy of AUDI OF AMERICA, LLC

Tightening Specifications

• Refer to OVERVIEW - TIRE PRESSURE MONITORING SENSOR