Thorax Airbag Wire, Removing And Installing, Super Sport Seat: Removing
Risk of injury due to involuntary deployment.
- Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
- Observe the additional safety precautions for the thorax airbag. Refer to ADDITIONAL THORAX AIRBAG SAFETY PRECAUTIONS .
- Observe the disposal regulations for pyrotechnic components. Refer to AIRBAG, BELT TENSIONER AND BATTERY CUT-OUT UNITS, STORING, TRANSPORTING AND DISPOSING (PYROTECHNIC COMPONENTS) .
-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Fasten the front seat on the : VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Remove the backrest cover and side sill side trim. Refer to BACKREST COVER, REMOVING AND INSTALLING, SUPER-SPORT SEAT .
Risk of eye injury.
- Wear protective eyewear!
-- Drill out the rivets -3-.
-- Remove the bolts -1 and 2-.
The inner threaded plate in the backrest frame may loosen and fall out when removing the screw -1-.
-- Remove the guide plate -4- for the airbag.
-- Remove the clip -left arrow- side sill side from the backrest frame using the : 80-200 .
-- Detach the lower molding -1- from the backrest frame.
-- Disengage the molding -2- side sill side on the bracket on the backrest frame.
Risk of injury due to involuntary deployment.
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
-- Release the connector lock -2- with a small screwdriver -arrow-.
-- Disconnect the connector -1- on the thorax airbag igniter.
-- Unclip and free up the thorax airbag wire on the backrest frame.
-- Carefully remove the thorax airbag wire from the backrest frame.
-- Disconnect the modular wiring routing. Refer to MODULAR WIRING ROUTING, DISCONNECTING AND CONNECTING .
-- Open the corrugated tube, remove the wire for the thorax airbag with the connector and free up at the seat pan.
-- If necessary, remove the screws -1 and 3- and remove the child seat anchor -2- from the front seat.
-- Remove the tunnel-side seat side trim to do this. Refer to SEAT SIDE TRIM ON TUNNEL SIDE, REMOVING AND INSTALLING .