Overview - Knee Airbag, Driver Side
- Driver Knee Airbag Igniter -N295-
- Removing and installing. Refer to KNEE AIRBAG WITH IGNITER, REMOVING AND INSTALLING, DRIVER SIDE .WARNING:
Risk of injury due to involuntary deployment.
- Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
CAUTION:There is a risk of damaging the surface of the knee airbag from mechanical stress.
- After finishing the procedure, perform a visual inspection to make sure the surface of the knee airbag is not damaged, especially along the perforation area.
- Removing and installing. Refer to KNEE AIRBAG WITH IGNITER, REMOVING AND INSTALLING, DRIVER SIDE .
- Nut
- 8 Nm
- Replace after removing.
- Quantity: 2
- Bracket
- For the knee airbag
- Bolts
- 3 Nm
- Spring Nut
- Insert in the mounting points on the instrument panel crossmember
- Quantity: 4
- Bolts
- 3 Nm
- Bracket
- For the knee airbag
- Nut
- 8 Nm
- Replace after removing.
- Quantity: 2
- Connector
- For the Driver Knee Airbag Igniter -N295-