Seat Belt For Child Seat, Checking Child Seat Restraint Function, Market-Specific, Not For Driver Seat Belt

To Check the Function, the Entire Belt System Must Be Installed, including the Side Trim Panel.

Hold Function, Switching On

• Pull out the seat belt all the way.

Proper Function

• The belt must retract with a chattering sound.
• If the retracting process is stopped, the belt cannot be pulled out anymore.

Switching Off

• Belt retraction to about 100 mm remaining.
• Hold function must switch off with a remainder of 100 mm, at the latest. The belt functions normally again.

If the seat belt for the child seat restraint function does not work, replace the seat belt