Refrigerant Lines, Disconnecting And Connecting To A/C Compressor, Vehicles With 4-Cylinder Engine: Installing
Install in reverse order of removal and note the following:
Install in reverse order of removal and note the following:
-- Replace the O-rings -3-. For the correct version. Refer to the Parts Information.
-- If equipped, check the alignment pin -4- for damage and proper seating.
-- Check the guide ring -2- on the refrigerant line connection for damage.
-- Insert the O-ring -3- into the groove -arrow- on the refrigerant line connection -1-.
-- Coat the O-rings with refrigerant oil before installing. Refer to REFRIGERANT CIRCUIT SEALS .
-- Insert the refrigerant lines without tension into the connections on the A/C compressor and tighten.
-- Check the routing of the refrigerant lines after attachment. They must be inserted in the provided brackets in a tension-free manner and must not come in contact with other components.
-- Evacuate and charge the refrigerant circuit. Refer to Refrigerant Circuit or Working with A/C Service Station (1 Of 2) / Working with A/C Service Station (2 Of 2) .
-- Start the A/C system after charging the refrigerant circuit. Refer to A/C SYSTEM, STARTING AFTER CHARGING REFRIGERANT CIRCUIT .