Heater And A/C Unit Evaporator Housing, Removing And Installing: Installing
Install in reverse order of removal and note the following:
-- Check the evaporator housing -A- for contamination and at the same time pay special attention to the duct for the condensation water drains -C- and the evaporator -D-.
-- Check the doors in the air distribution housing -B- for damage and correct installation
-- Check the air distribution housing -B- for debris or damage.
-- Check the connection point between the air distribution housing -B- and the evaporator housing -A- (groove /spring connection) for damage and lightly coat the connection points with, for example, silicone grease. Refer to OVERVIEW - HEATER AND A/C UNIT .
-- Engage the evaporator housing on the air distribution housing and assemble with this.
-- Check the heater core connection and the coolant pipes before installing for damage or debris. Refer to HEATER CORE, REMOVING AND INSTALLING .
-- Re-install the remaining removed parts in reverse order.