General Information
Vehicles with a High Voltage System (Hybrid Vehicles)
Extremely Dangerous Due to High-Voltage
The high-voltage system is under high-voltage. Death or serious bodily injury by electric shock.
-- Individuals with electronic/medical life- and health sustaining machines in or on their person cannot perform any work on high-voltage systems. Life- and health sustaining machines are for example pain killer pumps, implanted defibrillators, pacemakers, insulin pumps, and hearing aids.
-- Have the high-voltage system de-energized by a qualified person.
There is a Risk of Injury from the Engine Starting Unexpectedly.
On electric - hybrid vehicles an active ready mode is difficult to identify. Parts of the body can be clamped or pulled.
-- Turn off the ignition.
-- Place the ignition key outside of the vehicle interior.
Risk of Damaging the High-Voltage Cables.
Misuse can damage the insulation of high-voltage cables or high-voltage connectors.
-- Never support objects on the high-voltage cables and the high-voltage connectors.
-- Never support tools on the high-voltage cables and the high-voltage connectors.
-- Never sharply bend or kink the high-voltage cables.
-- When connecting pay attention to the coding of the high-voltage connectors.
- For all procedures on vehicles with high-voltage system pay attention to the additional warning message for these vehicles. Refer to WARNINGS WHEN WORKING ON VEHICLES WITH HIGH VOLTAGE SYSTEM .
- If procedures are necessary near components of the high-voltage system "perform a visual inspection of the damage of the high-voltage components and lines". Refer to PERFORMING A VISUAL INSPECTION OF DAMAGE TO HIGH VOLTAGE COMPONENTS AND CABLES .
- If work on the components of the high-voltage system is necessity, de-energize the high-voltage system. Refer to the appropriate service information.
Working on the refrigerant circuit with the A/C service station can normally be performed without needing to de-energize the high-voltage system.
-- Charge the vehicle battery, for example, using the Battery Charger :VAS5904 in the battery support mode to minimize the number of automatic starts during the test- and measuring procedures while the ready mode is active. Refer to BATTERY, CHARGING and the appropriate service information. .
-- For testing and measurement procedures that require the ready mode to be active or the ignition to be switched on, the selector lever must be in the "P" position and the parking brake must be activated. The required tools must be placed so that they do not come into contact with any rotating components in the engine and they must also not go into the vicinity of the rotating components when the engine is running.
Also move the selector lever into position "P" and activate the parking brake for testing and measuring procedures which require the ignition to be on, but do not require the ready mode to be active.
The ready mode is displayed in the Instrument Cluster Control Module -J285- above the "power meter". Refer to Owner's Manual.
For activating and deactivating the ready mode. Refer to the Owner's Manual (while doing so, note the display in the Instrument Cluster Control Module -J285-).
Vehicles with Start/Stop System
There is a Risk of Injury from the Engine Starting Unexpectedly
The engine can start unexpectedly on vehicles with an activated Start/Stop System. A message appears in the instrument cluster indicating whether the Start/Stop System is activated.
-- Deactivate the Start/Stop System: Turn off the ignition.
All Vehicles
-- Turn off the ignition.
Refer to SERVICE STATION, CONNECTING WITH CONNECTIONS ON LOW- AND HIGH PRESSURE SIDE OF REFRIGERANT CIRCUIT
Refer to SERVICE STATION, CONNECTING WITH NO CONNECTION ON LOW- AND HIGH PRESSURE SIDE OF REFRIGERANT CIRCUIT