Refrigerant Lines With Inner Heat EXCHANGER, Removing And Installing: Installing
Install in reverse order of removal and note the following:
- Coat the O-ring seals lightly with refrigerant oil before installing. Refer to REFRIGERANT CIRCUIT SEALS .
- Install the refrigerant lines stress-free.
-- Check the grommet -D- of the pass-through for damage and correct seating in the opening on the body (check the catches -E-).
-- Insert both refrigerant lines to the expansion valve -D and E- after installing the inner heat exchanger -C- in the bracket -B-.
-- Insert both refrigerant lines -B and C- after installing on the inner heat exchanger -E- in the bracket -D-.
-- Install the bolts -A-.
-- Check the routing of the refrigerant lines after attachment. They must be inserted in the provided brackets in a tension-free manner and must not come in contact with other components.
-- Evacuate and charge the refrigerant circuit. Refer to Refrigerant Circuit or Working with A/C Service Station (1 Of 2) / Working with A/C Service Station (2 Of 2) .
-- Start the A/C system after charging the refrigerant circuit. Refer to A/C SYSTEM, STARTING AFTER CHARGING REFRIGERANT CIRCUIT .